• PWSlogo

DB-VIC 4-Zone VHF Intercom RX Multicoupler


4-Zones (4 x Antenna Inputs)
8 Outputs
169-216 MHz RF Filtration
Individual Zone Bias Control
Individual Zone Attenuation Control 0 to -10dB
For use with RAD UV-1G Intercom Systems

1 to 2 Week Lead Time

Out of stock

Product Description

The DB-VIC Multicoupler is built primarily to support the receive side of RAD UV-1G wireless intercom systems. Optimized for use in the VHF frequency range, filtered for 179-216 MHz. Four antenna inputs are combined, filtered and amplified to unity gain. Eight outputs supply signal to up to eight UV-1G base stations. http://radioactiverf.com/products/uv-1g-wireless-intercom/

The DB Series Multicouplers are receive antenna distribution products featuring custom RF filters, variable attenuation controls for each input, dual redundant internal power supplies and built-in self-protecting bias power supplies for remote line amps. The DB series multicouplers serve as the head end for the receive antenna system. Antennas are connected to rear-panel input zone connections. Each input features overload protected remote bias power, selective from front panel switches. The associated indicators depict the health of the remote line amp (connected, disconnected or shorted.) Each input has an associated front panel variable attenuator that is used to tailor the amount of gain from that antenna in order to balance the overall system. The RF signals are then combined, filtered and amplified before being presented at the rear panel for connection to individual wireless receivers.